News ·
Royma brings liquid-metal-jet inline CT to advanced packaging lines

Royma brings inline computed tomography (CT) with an integrated liquid-metal-jet microfocus X-ray source to advanced packaging lines. Royma advanced packaging inline CT inspects bumps, interconnects and stacked layers in 3D on the production floor, at micrometre-level resolution and accuracy. The same configuration already runs in series production, where it delivers significantly increased inspection throughput.
Royma inline CT places the scan inside the line rather than in a separate laboratory. With the liquid-metal-jet source, the machine combines a fine focal spot with high X-ray flux. That combination is what moves CT from sample inspection towards inspection at line rate. Royma integrates the source, the mechanics and the reconstruction into one inline machine and supports it on the shop floor.
Key features of the configuration:
- Liquid-metal anode: a continuously regenerating jet of liquid metal replaces the solid target, so the electron beam cannot melt it.
- Fine detail at line speed: micrometre-level resolution and accuracy, maintained at significantly increased inspection throughput.
- Full 3D data per part: every layer of a stacked package is reconstructed separately instead of being superimposed in one 2D image.
- Proven in series production: the source is integrated and supported in Royma inline CT that runs on a production line today.
More power at a fine focal spot
In a conventional microfocus X-ray source, the solid anode limits how much power the focal spot can take before the target is damaged. Fine detail then comes at the cost of long exposure times, which keeps high-resolution CT in the laboratory. The liquid-metal-jet source removes that thermal limit. The anode regenerates continuously, so far more power can be driven into a fine focal spot than a solid target survives. Royma inline CT uses this to capture the same fine detail in a fraction of the time.
“The liquid-metal-jet source gives our inline CT the flux at a fine focal spot that high-resolution 3D inspection at line speed depends on,” says Gabor Szabo, Sales Director Europe, Royma Europe. “Customers get micrometre-level detail on the line instead of in a separate inspection room.”
Running in series production today
Royma has integrated liquid-metal-jet sources into its inline CT for battery quality assurance in consumer-electronics manufacturing. There, the configuration delivers significantly increased inspection throughput while maintaining micrometre-level resolution and accuracy. Royma keeps the source running, calibrated and serviceable at production volume. For a process engineer, this is the difference between a laboratory instrument and a machine that can be specified for a line.
Royma now offers the same configuration to the advanced packaging lines being equipped for stacked and chiplet-based assemblies. The source, the integration and the service model stay the same; the scan task is adapted to the package.
Bumps and interconnects in three dimensions
In an advanced package, solder bumps, micro-bumps and ball-grid arrays sit in several layers above one another. A 2D X-ray image projects these layers onto one plane, so a void in one layer can hide behind a ball in the next. Royma inline CT reconstructs the package in 3D and shows each layer on its own. Voids, bridging, missing or misaligned balls and incomplete joints become visible at the interconnect where they occur.
The 3D data also support measurement of internal geometry, such as ball shape, layer alignment and joint position, without sectioning the part. Because the inspection happens inline, the result is available while the lot is still in production. Process and yield engineers gain earlier feedback on bonding and reflow steps and fewer parts lost to destructive analysis.
“With inline CT, the package is inspected in 3D before it leaves the line,” says Gabor Szabo. “That gives the process team data on every interconnect layer, not on a single projection.”
Royma inline CT is part of the Royma inline CT family. Further information on CT inspection of semiconductor packages is on the semiconductor application page.
Test scans available
Royma offers test scans of customer packages to show what inline CT with a liquid-metal-jet source reveals in a specific part. Contact Adrian de Riz, Sales Director, Royma Europe, adrian_deriz@roymatek.eu, +49 511 57092696 – www.roymatek.jp.
About Royma: Royma Industrial CT develops and builds industrial X-ray and computed tomography systems, from 2D X-ray to horizontal, gantry, planar and inline CT, for manufacturers in battery, aerospace, semiconductor, casting, electronics and automotive production.